CUTTER 1000

1959Secondhand
Naarden, NETHERLANDS
€100excluding tax
Bootveiling.com Professional

Information about the boat

Brand
CUSTOM
Model
CUTTER 1000

Dimensions

Length
10 m
Beam
2.5 m
Draught
1.2 m
Air draught
10.4 m

Living on board

Couchettes
4

Ad information

Published on
07/10/2024
Updated on
28/10/2024
Ref
154966

Key features

Draught
1.2 m
Total length
10 m
Beam
2.5 m
Total number of berths
4

Description

Cutter 1000 now in the online auction. Anyone can bid until November 19, 2024

Built in 1908, this charming Scottish Cutter is a beautiful wooden sailboat with a rich history. With a length of 10 meters, a width of 2.5 meters and a draft of 1.2 meters, the boat offers enough space for comfortable accommodation. The headroom of 1.7 meters inside makes it pleasant to move around the accommodation.

Although the boat is currently in a state of disrepair with significant flaws, it has potential for restoration. The double polyester sheathing shows invisible cracks that cause leaks on the upper deck, which requires additional attention. The last antifouling treatment took place in 2019 and the boat is currently out of the water for maintenance.

Inside, you will find original features, including a single stainless steel sink and worktop, as well as two wide sleeper sofas with storage underneath. There are four permanent berths, perfect for a short stay. The boat features a manual toilet with an outside drain.

With two masts and three sails, including a mainsail, jib and mizzen, the Cutter has the necessary rigging for a traditional sailing experience. Engine status is unknown, but a 20-liter diesel fuel tank is present, and has been sailed in the past.

 

ADDITIONAL INFORMATION

  • We recommend taking advantage of the viewing day.
  • The boat is on the shore
  • This boat comes without a trailer.
  • This boat is sold under the general and special auction conditions.
  • This is a public auction so the purchase cannot be returned based on the legal right of withdrawal.


Accommodation
Other: There is a stainless steel single sink and a worktop, everything is still in the original state of construction, there are 2 wide sofa beds with storage space underneath they are two berths next to the engine, on both sides since the engine is in the middle and also storage space under it, there is no dining table present
Engine, electrics, water
Measuring instruments: none
Other: It was refueled and sailed in 1998 No connection provided
Rig and sails
Genoa reefing system: Yes
Other: Condition of sails: fair manual


Inventory

Hull

Draught
1.2 m
Bridge clearance
10.4 m
Total length
10 m
Beam
2.5 m

Tanks

Total capacity in Litres
20 L

Equipment

Interior equipment

Total number of berths
4

Location

This boat can be visited in Naarden, NETHERLANDS

Do you like the CUTTER 1000 model? Also discover: